Я попробовал настроить passthrough для сетевой карты, используя учебные пособия и добавил параметр "pcie_port_pm=off" в Grub, но виртуальная машина всё равно не запускается.
Код: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt pcie_port_pm=off"
Вывод dmesg:
[ 29.317702] igc 0000:08:00.0 enp8s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 29.318067] vmbr0: port 1(enp8s0) entered blocking state
[ 29.318089] vmbr0: port 1(enp8s0) entered forwarding state
[ 34.560328] bpfilter: Loaded bpfilter_umh pid 907
[ 34.561859] Started bpfilter
[ 44.857354] kvm[941]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 66.021868] igc 0000:05:00.0 enp5s0: PHC removed
[ 66.266695] vfio-pci 0000:05:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 66.329059] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 67.057435] vfio-pci 0000:05:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 68.305406] pcieport 0000:00:1c.6: broken device, retraining non-functional downstream link at 2.5GT/s
[ 69.305362] pcieport 0000:00:1c.6: retraining failed
[ 69.305367] vfio-pci 0000:05:00.0: not ready 1023ms after FLR; waiting
[ 70.353354] vfio-pci 0000:05:00.0: not ready 2047ms after FLR; waiting
[ 72.657281] vfio-pci 0000:05:00.0: not ready 4095ms after FLR; waiting
[ 77.009139] vfio-pci 0000:05:00.0: not ready 8191ms after FLR; waiting
[ 85.456817] vfio-pci 0000:05:00.0: not ready 16383ms after FLR; waiting
[ 103.888203] vfio-pci 0000:05:00.0: not ready 32767ms after FLR; waiting
[ 138.702975] vfio-pci 0000:05:00.0: not ready 65535ms after FLR; giving up
[ 139.742958] pcieport 0000:00:1c.6: broken device, retraining non-functional downstream link at 2.5GT/s
[ 140.742906] pcieport 0000:00:1c.6: retraining failed
[ 141.998878] pcieport 0000:00:1c.6: broken device, retraining non-functional downstream link at 2.5GT/s
[ 143.006832] pcieport 0000:00:1c.6: retraining failed
[ 143.006837] vfio-pci 0000:05:00.0: not ready 1023ms after bus reset; waiting
[ 144.046788] vfio-pci 0000:05:00.0: not ready 2047ms after bus reset; waiting
[ 146.126724] vfio-pci 0000:05:00.0: not ready 4095ms after bus reset; waiting
[ 150.478595] vfio-pci 0000:05:00.0: not ready 8191ms after bus reset; waiting
[ 158.926273] vfio-pci 0000:05:00.0: not ready 16383ms after bus reset; waiting
[ 175.568540] vfio-pci 0000:05:00.0: not ready 32767ms after bus reset; waiting
[ 210.383390] vfio-pci 0000:05:00.0: not ready 65535ms after bus reset; giving up
[ 210.387140] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 211.979150] tap100i0: entered promiscuous mode
[ 212.016258] vmbr0: port 2(fwpr100p0) entered blocking state
[ 212.016263] vmbr0: port 2(fwpr100p0) entered disabled state
[ 212.016283] fwpr100p0: entered allmulticast mode
[ 212.016349] fwpr100p0: entered promiscuous mode
[ 212.016404] vmbr0: port 2(fwpr100p0) entered blocking state
[ 212.016406] vmbr0: port 2(fwpr100p0) entered forwarding state
[ 212.030461] fwbr100i0: port 2(tap100i0) entered blocking state
[ 212.030466] fwbr100i0: port 2(tap100i0) entered disabled state
[ 212.030485] tap100i0: entered allmulticast mode
[ 212.030542] fwbr100i0: port 2(tap100i0) entered blocking state
[ 212.030545] fwbr100i0: port 2(tap100i0) entered forwarding state
[ 212.713863] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 212.713959] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 212.714134] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 213.455291] vfio-pci 0000:05:00.0: timed out waiting for pending transaction; performing function level reset anyway
Код: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt pcie_port_pm=off"
Вывод dmesg:
[ 29.317702] igc 0000:08:00.0 enp8s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 29.318067] vmbr0: port 1(enp8s0) entered blocking state
[ 29.318089] vmbr0: port 1(enp8s0) entered forwarding state
[ 34.560328] bpfilter: Loaded bpfilter_umh pid 907
[ 34.561859] Started bpfilter
[ 44.857354] kvm[941]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 66.021868] igc 0000:05:00.0 enp5s0: PHC removed
[ 66.266695] vfio-pci 0000:05:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 66.329059] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 67.057435] vfio-pci 0000:05:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 68.305406] pcieport 0000:00:1c.6: broken device, retraining non-functional downstream link at 2.5GT/s
[ 69.305362] pcieport 0000:00:1c.6: retraining failed
[ 69.305367] vfio-pci 0000:05:00.0: not ready 1023ms after FLR; waiting
[ 70.353354] vfio-pci 0000:05:00.0: not ready 2047ms after FLR; waiting
[ 72.657281] vfio-pci 0000:05:00.0: not ready 4095ms after FLR; waiting
[ 77.009139] vfio-pci 0000:05:00.0: not ready 8191ms after FLR; waiting
[ 85.456817] vfio-pci 0000:05:00.0: not ready 16383ms after FLR; waiting
[ 103.888203] vfio-pci 0000:05:00.0: not ready 32767ms after FLR; waiting
[ 138.702975] vfio-pci 0000:05:00.0: not ready 65535ms after FLR; giving up
[ 139.742958] pcieport 0000:00:1c.6: broken device, retraining non-functional downstream link at 2.5GT/s
[ 140.742906] pcieport 0000:00:1c.6: retraining failed
[ 141.998878] pcieport 0000:00:1c.6: broken device, retraining non-functional downstream link at 2.5GT/s
[ 143.006832] pcieport 0000:00:1c.6: retraining failed
[ 143.006837] vfio-pci 0000:05:00.0: not ready 1023ms after bus reset; waiting
[ 144.046788] vfio-pci 0000:05:00.0: not ready 2047ms after bus reset; waiting
[ 146.126724] vfio-pci 0000:05:00.0: not ready 4095ms after bus reset; waiting
[ 150.478595] vfio-pci 0000:05:00.0: not ready 8191ms after bus reset; waiting
[ 158.926273] vfio-pci 0000:05:00.0: not ready 16383ms after bus reset; waiting
[ 175.568540] vfio-pci 0000:05:00.0: not ready 32767ms after bus reset; waiting
[ 210.383390] vfio-pci 0000:05:00.0: not ready 65535ms after bus reset; giving up
[ 210.387140] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 211.979150] tap100i0: entered promiscuous mode
[ 212.016258] vmbr0: port 2(fwpr100p0) entered blocking state
[ 212.016263] vmbr0: port 2(fwpr100p0) entered disabled state
[ 212.016283] fwpr100p0: entered allmulticast mode
[ 212.016349] fwpr100p0: entered promiscuous mode
[ 212.016404] vmbr0: port 2(fwpr100p0) entered blocking state
[ 212.016406] vmbr0: port 2(fwpr100p0) entered forwarding state
[ 212.030461] fwbr100i0: port 2(tap100i0) entered blocking state
[ 212.030466] fwbr100i0: port 2(tap100i0) entered disabled state
[ 212.030485] tap100i0: entered allmulticast mode
[ 212.030542] fwbr100i0: port 2(tap100i0) entered blocking state
[ 212.030545] fwbr100i0: port 2(tap100i0) entered forwarding state
[ 212.713863] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 212.713959] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 212.714134] vfio-pci 0000:05:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 213.455291] vfio-pci 0000:05:00.0: timed out waiting for pending transaction; performing function level reset anyway
