Dietmar, у меня такая же проблема, как и у greeneye. Твой совет тоже, похоже, не работает. Код:
# pveversion -vpve-manager: 2.1-14 (pve-manager/2.1/f32f3f46)
running kernel: 2.6.32-14-pve
proxmox-ve-2.6.32: 2.1-74
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-14-pve: 2.6.32-74
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.92-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.8-1
pve-cluster: 1.0-27
qemu-server: 2.0-49
pve-firmware: 1.0-18
libpve-common-perl: 1.0-30
libpve-access-control: 1.0-24
libpve-storage-perl: 2.0-31
vncterm: 1.0-3
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.1-8
ksm-control-daemon: 1.1-1
# sg_map
/dev/sg0
/dev/sg1 /dev/sda
/dev/sg2 /dev/scd0
/dev/sg3 /dev/sdb
/dev/sg4 /dev/sdc
/dev/sg5 /dev/nst0
# cat /etc/pve/qemu-server/104.conf
bootdisk: virtio0
cores: 2
ide2: none,media=cdrom
memory: 1024
name: backup
net0: rtl8139=8A:7A:5E:65:23:BA,bridge=vmbr0,rate=5
onboot: 1
ostype: l26
sockets: 2
usb0: host=1-6
virtio0: local:104/vm-104-disk-1.vmdk,backup=no
virtio1: local:104/vm-104-disk-2.vmdk,backup=no
scsihw: virtio-scsi-pci
scsi0: /dev/sg5
# qm start 104
kvm: -drive file=/dev/sg5,if=none,id=drive-scsi0,aio=native,cache=none: не удалось открыть образ диска /dev/sg5: Недопустимый аргумент
start failed: команда '/usr/bin/kvm -id 104 -chardev 'socket,id=qmp,path=/var/run/qemu-server/104.qmp,server,nowait' -mon 'chardev=qmp,mode=control' -vnc unix:/var/run/qemu-server/104.vnc,x509,password -pidfile /var/run/qemu-server/104.pid -daemonize -readconfig /usr/share/qemu-server/pve-usb.cfg -device 'usb-tablet,bus=ehci.0,port=6' -device 'usb-host,hostbus=1,hostport=6' -name backup -smp 'sockets=2,cores=2' -nodefaults -boot 'menu=on' -vga cirrus -k en-us -drive 'file=/var/lib/vz/images/104/vm-104-disk-2.vmdk,if=none,id=drive-virtio1,aio=native' -device 'virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb' -drive 'if=none,id=drive-ide2,media=cdrom,aio=native' -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -drive 'file=/var/lib/vz/images/104/vm-104-disk-1.vmdk,if=none,id=drive-virtio0,aio=native' -device 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=101' -device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' -drive 'file=/dev/sg5,if=none,id=drive-scsi0,aio=native,cache=none' -device 'scsi-block,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0' -m 1024 -netdev 'type=tap,id=net0,ifname=tap104i0,script=/var/lib/qemu-server/pve-bridge' -device 'rtl8139,mac=8A:7A:5E:65:23:BA,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'' завершилась с ошибкой: exit code 1
Есть ли у тебя другие идеи, как передать ленточный накопитель в гостевую систему?
